The PANN-PRG1 panel is designed to install the MC-PRG1 programmer quickly in electrical cabinets, applicators and generally speaking in any front panel of electrical equipment. The diagnostic LEDs of the MC-PRG1 programmer are situated on the front of the PANN-PRG1 panel (green LED=system status and red LED=anomaly) and, if combined with hot gluing systems, there will be a LED of the level sensor of the adhesive in the tank.

The PANN-PRG1 panel also has a socket for the programming terminal (MC-TRM1 or PC with PRG1-COM programming software) and a selector for choosing the size to be used (you can select from 12 sizes).

In the picture above, the PANN-PRG1 panel is installed in a Melton applicator, series C, in which it is particularly easy to install, even if it can also be just as easily installed on any type of plastic or metal panel by creating a rectangular slot of suitable dimensions and 4 fixing holes.

Related arguments:

• Programmer for sections of adhesive in modular version MC-PRG1