Programmer for sections of adhesive in compact version COMPACT-PLUS |
|
|
|
Written by emmeci
|
Saturday, 14 April 2007 00:40 |
|
System for adjusting and positioning the sections of adhesive, suitable for all applications in the packaging and assembly industries (box closing, labelling etc.). Thanks to its precision and reaction speed, it is particularly suitable for use on fast infeed lines or in particularly critical applications. |
The innovative aspects of Compact-Plus are many:
-
High quantity of glue sections/pauses managed (8 sections and 8 pauses)
-
High number of sizes (16 to which a name of 8 digits can be assigned, each of which allowing quicker identification)
-
Possibility to manage up to a maximum of 4 channels (guns or other actuators) completely independently.
-
Possibility to use an independent spray starting (trigger) sensor for each gun.
-
Outstanding versatility in view of the use of sensors (PNP or NPN sensors can be used)
-
A full diagnosis system for indicating the status of the system (Off, On, Error etc.) and for easily identifying the anomaly triggered via an error code that is displayed directly on the display
-
A full test procedure that checks the efficiency of the guns and the spraying control sensors statically (with the line at a standstill)
-
Help on line to facilitate use: the operator presses a button to view the instructions related to the menu on the display.
-
Possibility to use a password of 1 to 5 figures to protect the operational and size parameters programmed.
-
High performance timer for switching the applicator on/off:
-
For each day of the week, 2 time bands can be programmed independently by the user.
-
Weekends and bank holidays etc. need to be managed specifically, to program the presence or otherwise of a weekend/bank holiday in advance (with maximum advance of 24 days) (on a non work day, the applicator remains off despite the time bands programmed)
-
Possibility to interface with other systems: via 2 dedicated outputs, you can manage the alarm and timer on/off conditions
The COMPACT-PLUS programmer is available in 2 models that can be used on different types of packaging lines:
-
COMPACT-PLUS/E: is a programmer on which the duration of the adhesive sections and of the pauses is expressed in millimetres. This programmer can therefore be used on any type of system, because the presence of an encoder means you can synchronise the duration of the adhesive sections and the pauses with the infeed of the line. The presence of a sophisticated self-calibration system of the encoder and the possibility to compensate delays of the guns, means that you can obtain very high precision even on lines subject to ample variations.
Technical specifications of Compact-Plus/T and /E
CASE |
Plastic with protection rating IP65 |
DIMENSIONS (width x height x depth) |
263 x 216 x 133 mm |
CONNECTIONS |
Extractable screw-on terminals for cable Ø max.1.5 mm |
POWER SUPPLY
|
22-26Vcc |
NUMBER OF SECTIONS MANAGED
|
8 sections of adhesive + 8 pauses |
NUMBER OF SIZES AVAILABLE
|
16 combined with just as many messages of 8 digits each
|
NUMBER OF OUTPUTS MANAGED
|
4 |
MAX CURRENT ON EACH ELECTROVALVE PILOT OUTPUT
|
1,5A (@ 25°C) |
TIPOLOGIA DELL’USCITA DI PILOTAGGIO ELETTROVALVOLE |
Static relays (SSR) with PNP logic
|
TYPE OF ELECTROVALVE PILOT OUTPUT
|
Opto-insulated with NPN or PNP logic
|
NUMBER OF AUXILIARY OUTPUTS
|
2 (system anomaly and timer on) |
MAX CURRENT ON EACH AUXILIARY OUTPUT |
100mA (@ 25°C) |
TYPE OF AUXILIARY OUTPUT
|
NPN logic
|
Compact-Plus/T
LENGHT OF EACH SECTION / PAUSE |
0-9999 msec |
SYSTEM PRECISION
|
± 1 msec |
Compact-Plus/E
LENGHT OF EACH SECTION / PAUSE |
0-9999 mm |
SYSTEM PRECISION |
± 1 encoder pulse
|
MAXIMUM LINE SPEED
|
>500 meters/min * |
* The maximum speed of the line depends on the frequency of the encoder (max. 12KHz).
Related arguments:
|
Last Updated on Thursday, 18 September 2014 13:31 |