|
NOZZLECALC - software for selecting the type of 2-holes nozzle |
 |
 |
 |
|
Written by emmeci
|
|
Friday, 27 April 2007 23:43 |
 |
The NozzleCalc software, produced by Emmeci Elettronica, is used to select the type of 2-holes nozzle most suitable for the application requested.
Basically, the NozzleCalc software requests the data related to the required result (distance between the 2 sections deposited) and the distance between the nozzle outlet and the substratum to be glued; based on these data, it suggests the angle of the 2 holes requested to obtain the required result.
If you also enter a pair of additional data (diameter of the nozzle holes and the type of nozzle, straight or 90°) NozzleCalc suggests the model of nozzle of Melton’s standard production most suitable for the required result.
|
Minimum system requirements:
- Operating system: Windowsâ„¢ 95, 98 , ME ,NT4, 2000, XP
- Computer: 100% Windowsâ„¢ compatible
- CPU: 200MHz or superior
Windowsâ„¢ is a registered trade mark owned by Microsoft Corporation
 |
Download (Ita - 1,35 MB) |
ÂÂ
If you need English version of the software please send an e-mail to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
ÂÂ
|
|
Last Updated on Tuesday, 27 July 2010 10:03 |
